Bounty’s Revenge PLC Information

The PLC that controlled Bounty’s Revenge was a Westinghouse Numalogic PC700. It was coupled to dedicated electronic controls that read the position encoder and set the speed and direction of the main drive wheels, nothing like the ordinary inputs and outputs found on the Snowy River Rampage, Beastie and Bush Beast. The program was changed with a handheld Numalogic programmer.

Did you know?

The encoder at the top pivot told the PLC where the ship was at every moment and kept the main drive wheels in step with it. Whenever a positioning fault appeared, the encoder was the first thing the electricians checked.

A safety was built into the system. If no encoder pulse arrived within 13 seconds the PLC assumed the encoder chain had broken and put the ship into emergency stop. The ship would finish its arc and come down onto four locked tyres, with plenty of smoke and plenty of screams.

When the ride was commissioned, before the park opened, the maintenance electricians were trained on the system by the people who had assembled it. If you knew which little LEDs to watch, most faults were fairly easy to diagnose.

One positioning fault took a month to find. The ship would finish its cycle, stop off centre and trip the PLC. Until it was fixed, the duty maintenance fitter and electrician (the Cruisers) were posted at Bounty’s all day to reset the ride after every cycle. The encoder was swapped for a spare but the fault stayed, and in the end it may have been mechanical backlash in the shaft that drove the encoder.

After the park closed, a floppy disk turned up in Bounty’s plant room. On it were the two photos below, the Numalogic programming software, and ladder logic for the Beastie and for Bounty’s, both the normal program and the one used during the laser show. The logic is on the PLC Ladder Logic page.

Photos 2

Got a Wonderland story or photos to share?

Join us on Facebook - share memories, photos and stories of Australia's Wonderland with thousands of other fans.

Join Wonderland History on Facebook →